It is important to have weather stations and leaf sensors in the area for growing blueberries. It helps in controlling plant diseases.

The list of diseases that you can control in blueberries with this method is as follows:

In the case of growing in pots and especially in pots, it is necessary to measure the water content, electrical conductivity EC and temperature in the substrate.

In addition, you should monitor the amount of water drained from the pot during the day and its electrical conductivity EC.

We offer the following packages of these devices:

Packages 1 and 2 consist of a Metos weather station and a leaf sensor. Both packages provide a forecast of blueberry diseases with real sensors. Additionally, package 1 offers a weather forecast, while package 2 does not provide this function, although you can use Metos’ virtual weather forecast (see details here).

Package 3. is built on fully Metos-compatible sensors and interfaces. It can be used to measure the amount of water drained from pots and its EC. However, the use of the sensor (Sentec Drill & Drop Triscan) in the substrate is not recommended by the manufacturer, Sentec, and the supplier, Metos.

Package 4. Built on the Agronik SDI 12 logger (www.progres.es) and is used to measure EC, pH and temperature in the pot, as well as the amount of water drained from the pots and EC. The package uses the world-proven Teros 12 sensor to measure EC, water content and temperature in the substrate. The measurement is done online.

This package can measure EC, water content and temperature in 2 additional pots within a radius of 50 m by adding the Teros 12 sensor. This package can be supplemented with a special wet and dry bud and humidity sensor from the company Rika that determines the bud freezing point.

With the data obtained from this package, you can automatically manage irrigation, fertigation and turn on the anti-freeze system.

You can choose a combination of packages at your discretion.